General

F1 22 Australia Car Configuration

F1 22 Australia Car Configuration

If you select the default career mode in F1 22, will be the third race in Australia. This iconic circuit has many points that drivers should pay attention to. Therefore, you may need the best Australian car setup to compete with others to win the Australian GP at Albert Park. In this guide you will find: best F1 22 Australia car setup to win the race at the Albert Park Circuit in Australia.

Albert Park Circuit is one of the iconic circuits in motorsport, especially in Formula 1. F1 races have been held on this circuit since 1996. Melbourne’s Albert Park is a 5.3-kilometer circuit and the winner on this track will be revealed after a 58-lap race. Due to the pandemic, this twisty track has not hosted any races since 2019. But this year Albert Park Circuit returned to the F1 calendar with some minor changes that made the Australian GP much faster and more exciting. Two corners have been removed and a few others have been changed to improve the flow of the track by making the corners wider and faster.

Before you take a look at the F1 22 Albert Park car setup, there are a few things to remember. First of all, Albert Park can be quite bumpy, so you have to find the best suspension settings. In addition, Australia has a track that requires a well-sorted chassis, and there are several places where the drivers need a reactive front end to be able to throw it into a corner. The average speed on this circuit is 235 km/h.

F1 22 Australia Car Setup Albert Park Australian GPF1 22 Australia Car Setup Albert Park Australian GP

Albert Park Circuit Australian GP

F1 22 Australia Dry Car Setup

Here’s the best F1 22 game Australian car setup to use in dry weather conditions during the Australian GP.

    • Aerodynamics
      • Aero front wing: 17
      • Rear Wing Aero: 24
    • Transfer
      • Differential adjustment on throttle: 60%
      • Differential throttle adjustment: 50%
    • suspension geometry
      • Camber for: -2.6
      • Camber rear: -1.8
      • Front Toe: 0.06
      • Back toe: 0.2
    • delay
      • Front suspension: 6
      • Rear suspension: 2
      • Front anti roll bar: 7
      • Rear sway bar: 2
      • Headroom Height: 2″
      • Rear ride height: 4″
    • Brakes
      • Brake pressure: 100%
      • Brake bias: 50%
    • Ties
      • Front right tire pressure: 23.8
      • Tire pressure front left: 23.8
      • Tire pressure rear right: 21.2
      • Tire pressure rear left: 21.2

F1 22 Australia Nat Car Setup

In Melbourne, people can experience four seasons in one day. So it’s not uncommon to watch a rainy Australian GP. Below is the Australian car setup that will make you faster in wet conditions.

    • Aerodynamics
      • Aero front wing: 19
      • Rear Wing Aero: 28
    • Transfer
      • Differential adjustment on throttle: 90%
      • Differential throttle adjustment: 55%
    • suspension geometry
      • Camber for: -2.6
      • Rear Camber: -1.3
      • Front toe: 0.05
      • Back toe: 0.2
    • delay
      • Front suspension: 5
      • Rear suspension: 5
      • Front anti-roll bar: 6
      • Rear stabilizer bar: 6
      • Headroom Height: 4″
      • Rear ride height: 4″
    • Brakes
      • Brake pressure: 95%
      • Brake bias: 53%
    • Ties
      • Front right tire pressure: 23.8
      • Tire pressure front left: 23.8
      • Tire pressure rear right: 22.7
      • Tire pressure rear left: 22.7

These are the best car setup for the Australian GP in F1 22. By using these car setups you can drive the car and compete with others in multiplayer and career modes. However, remember that these car settings can be adjusted to suit your game style and the F1 car you drive. You can also view car setups for other tracks in F1 22 game here. F1 22 is now available on PCs (via Steam and Origin), On PlayStation 4 and PlayStation 5and further Xbox Series X|S and Xbox One.